MexxPower MX-WM8M PTO Wood Chipper shredder Automatic Infeed

MexxPower MX-WM8M PTO Wood Chipper shredder Mechanical gearbox Infeed Automatic

The MexxPower MX-WM8M mechanical auto-feed chipper is a robust self-feeding PTO driven wood chipper attachment that mounts to the 3-point hitch of your tractor. This PTO woodchipper is compact, yet built to withstand commercial use.Dual infeed rollers grab and pull material into the chipper head using a sturdy belt driven gear box and drive axle system.

TRUE 8" X 8" infeed opening. MexxPower wood chippers offer a larger 8″x 8″ infeed to easily accept those crooked branches. 

6.25" Diameter Hardened Steel Commercial Style Infeed Rollers easily climbs up and grabs the branches to bite in and efficiently pull the material into the flywheel at up to 58 ft./min.

Chute can be turned by 360° with an adjustable throwing angle. The shredded material can be thrown up to 20 ft. in distance making it easy to fill trailers or containers.

Machine can be stop By simply pulling down SAFETY AUTO FEED STOP BAR , the user can even stop reverses the direction of the infeed rollers.

Large diameter (6.25″) infeed roller that easily climbs up and grabs the branches to bite in and efficiently pull the material into the flywheel. This chipper equipped with  2 dual edge reversible carbon CR12 KNIVES and one bed blade. Reversible chipper blades can be flipped to take advantage of having two cutting edges on one blade. MX-WM8M chipper knives can be changed from the side access panel of the machine by one person in as little as 10 minutes.

MexxPower MX-WM8M wood chippers are equipped with an adjustable bed knife to ensure that the proper knife gap is achieved. This feature allows the user to adjust the distance between the flywheel knife and the bed knife so that the required distance is maintained after knife sharpening. Proper gap is important so that even the smallest material is chipped as it passes through the chipper.

MexxPower MX-WM8M requires a tractor with a category 1 or 2 three point hitch and at least 19 hp. at the PTO. Chipping capacity is directly related to horse power and torque, therefore with 19 hp. you can expect to chip 4″ hard and 6″ soft material and with 50 hp. you can expect to chip any material up to 8″ in diameter with no trouble. In testing a 30 hp. tractor gave excellent work to fuel consumption results. Tractors with more than 50 hp. will not over power or damage the wood chipper since it is shear bolt protected, but will simply consume more fuel to accomplish the same results

ATTRIBUTES & SPECIFICATION:

• 19 hp. min. required
• 3 pt. hitch mount- fits category 1 or category 2 (cat-1 quick hitch)
• 8″ x 8″ In-Feed opening
• 200 lb. 24″ Diameter Flywheel (dynamically balanced)
• 2-Reversible Made in the USA fly wheel knives, 1 bed knife (anvil)
• 1120 RPM Flywheel speed
• Mechanical gear driven in-feed system
• Infeed rate 58 ft. /min.
• Hardened 6.25″ dia. chisel type in-feed roller
• Quick hitch Compatible (category 1 quick hitch only) (John Deere I-match/Land Pride QH10 require a special top link)
• 360 Degree swivel discharge chute
• Adjustable base legs
• High flow chamber ventilation
• 2″ diameter main shaft
• 3-Heavy duty cast steel main shaft bearings
• Adjustable infeed roller down pressure
• Shipping Weight 990 lbs. (shipping) Steel crate L=46″ x W=36″ x H=47″
• 8mm thick steel fly wheel housing
• Easy access fly wheel knife panel
• Adjustable bed knife (to achieve proper knife gap)
• 5 Heavy duty cogged drive belts
• Safety stop bar
• Horizontal “table height” in-feed hopper for easy loading
• Baked on powder coat finish
• Clear vinyl chip baffle
• PTO shaft included (shear bolt protected)